Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Allentown: What to Know First

We provide independent Famco chimney cap and crown service across Allentown, from standard cap replacements on the 3000 Series to full crown rebuilds on older multi-flue setups. Most Famco cap and crown jobs are completed in a single visit, and we’ll tell you plainly whether you need the work now or if it can wait until next season. In Allentown’s freeze-thaw climate, a cracked Famco crown or missing cap section rarely fixes itself.

Call (610) 632-1394

This page is for homeowners who already have a Famco cap or crown on their chimney and need honest answers about what’s failing, what it’ll cost, and who can do the work right. We’re not affiliated with Famco - we’re an independent service provider with no incentive to sell you parts you don’t need. Call (610) 632-1394 and a live person will pick up, any hour of any day.

How Famco Products Fail - and How We Fix Them

• 3000 Series Galvanized Caps - rust-through at the seams. The 3000 Series uses a lighter-gauge galvanized steel that holds up reasonably well in dry climates but struggles in Allentown’s wet winters and humid summers. We see rust bleeding from the corner seams after 8-12 years, sometimes sooner if the cap sits on a south-facing exposure where snow melt refreezes nightly. Our fix: we pull the cap, assess the flue tile condition underneath, and install either a Famco-compatible 304 stainless replacement or a heavier-gauge Gelco cap if the homeowner wants to step up. We never leave the old rust flakes in the flue - that’s how stains start on the firebox below.
• Multi-Flue Caps - sagging lid from snow load. Famco’s multi-flue caps with the flat or low-pitch lid design collect wet, heavy snow rather than shedding it. In Allentown, where we get those March storms that stick to everything, the lid gradually bows and the mesh sides pull away from the frame. We’ve replaced lids on homes near Cedar Creek Park that were less than six years old. Our fix: we measure the flue span on-site, check whether the original mounting brackets are still sound, and fit a properly pitched replacement lid with reinforced cross-bracing. If the brackets are corroded, we replace those too - no point in hanging a new lid on rotten hardware.
• Crown Coating Over Famco Bases - delamination from trapped moisture. Some Allentown homeowners had a previous contractor apply a crown coating product (sometimes HeatShield, sometimes a generic slurry) over a Famco metal crown base or transition piece. The coating looks fine for a season, then bubbles and flakes where water got underneath through a pinhole. The chimney doesn’t care what it looks like from the street. We check what’s inside. Our fix: we remove the failed coating, expose the base material, and determine whether the underlying Famco component is sound enough to re-coat or needs replacement. We document this with photos so you see exactly what we’re talking about.
• Standard Mesh Sides - corrosion and pull-away. Famco’s standard galvanized mesh on the 3000 and 5000 Series can corrode at the attachment points, especially when the cap sits low and the mesh stays in contact with wet flue gases longer. In older Allentown homes with shorter chimneys, this happens faster. Our fix: we match the mesh gauge and opening size to keep the cap spark-arrestor rated, using stainless hardware even on galvanized replacements. The small cost difference pays for itself in longevity.
• Custom Cap Orders - wrong base dimension from assumed sizing. Famco’s custom cap program requires precise base and flue measurements, but some contractors measure from the ground with a laser and order without verifying. A cap that overhangs too far catches wind; one that underhangs lets water run down the flue. Our fix: we measure in person, verify with a level that the crown or flue top is actually square (many aren’t), and confirm dimensions before ordering. If the lead time stretches past burning season, we can often fabricate a temporary cap from Copperfield components to keep water out until the Famco unit arrives.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, checks our availability in Allentown or your surrounding area, and books a time that works. No app, no callback queue.
2. 2
   On-site inspection with camera. Our technician arrives in uniform, verifies the Famco model and series from any markings or from visual identification if tags are gone, and runs a Level-2 camera inspection of the flue interior. You get photos and a plain-English verdict: what’s failing, what’s fine, and what we recommend.
3. 3
   Parts decision - OEM, compatible, or upgrade. If Famco still stocks the exact replacement, we quote it. If lead times are long or the original design has a known weak point, we explain the compatible or upgraded alternative (often Gelco or a Copperfield custom) and let you decide. No hidden preference - we show you the price and warranty difference.
4. 4
   The repair. Most Famco cap replacements and crown coatings are completed in one visit. Full crown rebuilds may need a return trip if forms and cure time are required. We protect your roof and landscaping, work clean, and haul away the old material.
5. 5
   Test and document. We verify proper draft with the new cap in place, check that mesh clearance meets code, and photo-document the finished work. You get a written report with images.
6. 6
   The 90-Day Done Right Promise. If anything isn’t right - a drip, a rattle, a draft issue - we come back. In writing, no arguing. That’s the Keystone Standard.

What Famco Chimney Cap & Crown Costs in Allentown

These are real ranges for Famco-specific work we’ve done in the Allentown area. Your exact price depends on roof access, flue condition, and whether we can reuse existing mounting hardware.

What moves the price: roof pitch and access difficulty, whether the flue tile needs repair before capping, and if we’re matching an unusual color or finish. We give you the full number before we start - the estimate you sign is the invoice you pay. Call (610) 632-1394 for a free estimate at your Allentown home.

Why Allentown Homeowners Call Hearthstone Chimney Co. for Famco Work

We’ve been answering calls in this area for over 42 years, and we’ve learned that homeowners who’ve been burned by contractors before want three things: straight answers, a fair price locked in advance, and someone who picks up the phone if something goes wrong. Our 90-Day Done Right Promise covers every Famco job in writing - no paperwork to dig up, no arguing about whether it’s “covered.”

Our technicians are background-checked, uniformed, and trained on Famco’s product lines alongside DuraFlex, HeatShield, Gelco, and others. If your Famco part is discontinued or backordered, we have alternatives that fit and function properly - we don’t leave you waiting while water gets in. And when you call (610) 632-1394, a live person answers. That hasn’t changed in four decades, and it won’t.

FAQs